Sanyo TV Service Menu

Sanyo TV Service Menu Method 1
1. Unplug the power cable.
2. Press and hold the {MUTE} button on the remote control while plugging the power cable back into the outlet.
3. Keep pressing the {MUTE} button until the TV powers on with the Service Menu displayed.
4. Use the {CH+} {CH-} buttons to select menus.
5. Use the {VOL+} {VOL -} buttons to change settings.
6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
7. Press the {MENU} button or turn the TV off to exit.
Sanyo TV Service Menu Method 2
1. Unplug the power cable.
2. Press and hold the {VOL -} button on the TV while plugging the power cable back into the outlet.
3. Keep pressing the {VOL -} button until the TV powers on with the Service Menu displayed.
4. Use the {CH+} {CH-} buttons to select menus.
5. Use the {VOL+} {VOL -} buttons to change settings.
6. Some menus might have sub-addresses. Use the numeric buttons {0} to {7} to adjust sub-item data.
7. Press the {MENU} button or turn the TV off to exit.
Sanyo Projector Service Menu Method 1
Factory Menu Access
1. Press and hold the {SELECT} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
2. The Factory Menu will be displayed.
Service Menu Access
1. Press and hold the {MENU} and {INPUT} buttons on the Projector at the same time for about 10 seconds.
2. The Service Menu will be displayed.
3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
4. To exit, turn the Projector Off.
Sanyo Projector Service Menu Method 2
1. Press & hold the {MENU} button on the Projector for about 10 seconds.
2. The Service Menu will be displayed.
3. Use the {UP} {DOWN} {LEFT} {RIGHT} buttons to move through menus and change values.
4. To exit, turn the Projector Off.